Blog About Techno And Science News | Esncoimbra.com

Posts Tagged ‘ccie’

To be truly prepared for your CCNA and CCNP exams, you need real hands-on experience with real Cisco routers and switches. However, a production network is a really bad place to practice your configurations, but an excellent way to get fired and/or sued. The key to becoming a true CCNA and CCNP is assembling your own Cisco home lab.

You don’t have to spend a lot of money to do so; used Cisco equipment is cheaper than ever. It’s robust as well – I’ve bought literally hundreds of used routers and switches over the years and have had very few problems. I owe much of my skill to practicing configurations and troubleshooting in my own home lab.

2501 routers are fantastic for CCNA and CCNP home labs. They come with two serial interfaces, allowing you to connect one interface directly to another router (you’ll need a DTE/DCE cable for that, too) while connecting another to a frame relay switch if you like. If you don’t have a frame relay switch, you can connect a 2501 directly to two other routers via the serial interfaces.
Read the rest of this entry »

To be truly prepared for your CCNA and CCNP exams, you need real hands-on experience with real Cisco routers and switches. However, a production network is a really bad place to practice your configurations, but an excellent way to get fired and/or sued. The key to becoming a true CCNA and CCNP is assembling your own Cisco home lab.

You don’t have to spend a lot of money to do so; used Cisco equipment is cheaper than ever. It’s robust as well – I’ve bought literally hundreds of used routers and switches over the years and have had very few problems. I owe much of my skill to practicing configurations and troubleshooting in my own home lab.

2501 routers are fantastic for CCNA and CCNP home labs. They come with two serial interfaces, allowing you to connect one interface directly to another router (you’ll need a DTE/DCE cable for that, too) while connecting another to a frame relay switch if you like. If you don’t have a frame relay switch, you can connect a 2501 directly to two other routers via the serial interfaces.

You also have an AUI port, which requires a transceiver to operate as your Ethernet interface. Transceivers are pretty cheap and readily available from Cisco resellers and ebay vendors, so pick one up for each 2503 you decide to buy.
Read the rest of this entry »

Candidates preparing to pass the CCNP exams are putting together Cisco home labs like never before. With CCNA and CCNP home lab equipment more affordable than ever, candidates have realized the importance of working on real Cisco routers and switches on the way to earning their certifications.

One question I get often from CCNP candidates is goes something like this: “I’m planning on pursuing the CCIE after I get my CCNP. What kind of routers and switches should I buy now in order to use the same equipment in my CCIE home lab?”

This is going to sound strange coming from me, because I’m the #1 proponent of CCNA and CCNP candidates buying their own home labs. When it comes to the CCIE, though, I have to say that you’re probably better off using rack rentals instead of investing big money now to buy more expensive equipment with which to earn your CCNP.

There are plenty of 2500 and 2600 routers out there that you can buy to prepare fully for your CCNA and CCNP exams that may not have the capability needed for IE preparation. (For instance, while 2500 routers are fantastic for CCNA and NP study, they shouldn’t be used for IE study.) The issue with buying more expensive equipment is that Cisco rightfully updates the CCIE lab equipment list twice a year, and these moves can prove very costly for those who get caught in the middle of these changes. Read the rest of this entry »

A Cisco access server is generally the last item a CCNA or CCNP candidate has on their mind when they’re putting together a home lab. The thinking tends to be that since this router isn’t really doing anything in the production part of your practice lab, it’s not really important.

Once you have more than two devices in your home lab, though, you’ll realize that constantly moving the console cable around from one router to another gets very tiresome. That’s what an access server does for a home lab – it allows you to connect your PC to a single device when working in your home lab, with no need to constantly disconnect and reconnect the console cable. The console cable will be connected directly to the access server, and the access server is connected to all the other devices in your home lab. Once you start working with one, you’ll wonder how you got along without it!

The term “access server” is a little misleading. This is not a server in the traditional sense, it’s a Cisco router with asynchronous serial ports. It is these ports that you’ll use to connect to the other devices in your home lab. Two affordable models of access servers are Cisco 2509s and Cisco 2511s. They can be found on ebay as well as other vendors on the Net.

You will also need an octal cable. On one end, the cable has a large connector that will connect to the access server. The other end is actually eight separate cables, each with RJ-45 connectors. These connectors are numbered 1 – 8 and will be connected to the console port on each router and switch. It is important to note the number on each connector you’re connecting to the other lab devices.

Now that you’ve got the physical equipment, let’s take a look at a typical configuration of an access server:

no service password-encryption

no service udp-small-servers
Read the rest of this entry »