Posts Tagged ‘Bryant’
May 2nd, 2011 | 
Author: ISDN is a vital topic for today’s CCNA and CCNP candidates, especially for the ICND and Intro exams – you’ve got to know ISDN inside and out to pass those exams. Naturally you want to include it in your home lab. What many candidates don’t realize is that you can’t connect two Cisco routers directly via their Basic Rate Interface (BRI) interfaces you’ve got to have another device between them called an ISDN simulator.
An ISDN simulator is not one of those software programs pretending to be routers (“router simulators”) this is a piece of hardware that acts as the telephone company in your home lab. Older simulators come with preprogrammed phone numbers and SPIDs, where newer ones let you program the phone numbers you want to use. Either way, an ISDN simulator is great for your CCNA/CCNP home lab, because you can practice dial scenarios that actually work. And you get to troubleshoot the ones that don’t, which is also important to learn! )
Read the rest of this entry »
Posted in 
Whether you’re on the road to the CCNA, CCNP, MCSE, or you’re on any other computer certification track, the odds are that sooner or later, you’re going to fail an exam. It’s happened to almost all of us, yours truly included. What you have to keep in mind in these times is that success is not a straight line. You’ve probably seen charts showing the growth of an industry or a business — you know, the ones that go from left to right, and look kind of jagged. The line goes up for a while, then down a bit, then up some more, then down a little.
The key? While every business has its setbacks, the net result is that the line goes up and progress is made. That’s how you want your certification pursuit and your career to go as well – upward!
I’m not asking you to be happy about failing an exam. You’re allowed to get mad for a few minutes, vow to never take another exam again, and be disappointed. What you’re not allowed to do is stay that way.
Read the rest of this entry »
CCNA and CCNP candidates who have their own Cisco home labs often email me about an odd situation that occurs when they erase a switch’s configuration. Their startup configuration is gone, as they expect, but the VLAN and VTP information is still there!
Sounds strange, doesn’t it? Let’s look at an example. On SW1, we run show vlan brief and see in this abbreviated output that there are three additional vlans in use:
SW1#show vlan br
10 VLAN0010 active
20 VLAN0020 active
30 VLAN0030 active
We want to totally erase the router’s startup configuration, so we use the write erase command, confirm it, and reload without saving the running config:
SW1#write erase
Read the rest of this entry »
